Audio-Technica AT8035 Line + Gradient Condenser Microphone
Audio-Technica AT8035 Line + Gradient Condenser Microphone
-70% Off$5,911.50
Description
The length (14.53″) of the AT8035 Line + Gradient Condenser Microphone is well-suited for ENG, outdoor recording and other specialized uses. The microphone is designed for video production and broadcast (ENG/EFP) audio acquisition. Suited for both boom & handheld use, it provides the narrow acceptance angle desirable for long-distance sound pickup, featuring excellent sound rejection from the sides and rear of mic and switchable low-frequency roll-off. It operates on battery or phantom power.Audio Technica AT8035 Features:
- Designed for video production and broadcast (ENG/EFP) audio acquisition
- Length is well-suited for ENG, outdoor recording and other specialized uses
- Provides the narrow acceptance angle desirable for long-distance sound pickup
- Excellent sound rejection from the sides and rear of mic
- Switchable low-frequency roll-off
- Operates on battery or phantom power
- RoHS compliant—free from all substances specified in the EU directive on hazardous substances
Audio Technica AT8035 Specifications:
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Line + gradient
- Frequency Response: 40-20,000 Hz
- Low Frequency Roll-Off: 80 Hz, 12 dB/octave
- Open Circuit Sensitivity: Phantom: –38 dB (12.5 mV) re 1V at 1 Pa
- Battery: –39 dB (11.2 mV) re 1V at 1 Pa
- Impedance: Phantom: 250 ohms
- Battery: 300 ohms
- Maximum Input Sound Level: Phantom: 132 dB SPL, 1 kHz at 1% T.H.D.
- Battery: 120 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range (typical) Phantom: 110 dB, 1 kHz at Max SPL
- Battery: 98 dB, 1 kHz at Max SPL
- Signal-To-Noise Ratio: 72 dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 11-52V DC, 2 mA typical
- Battery Type: 1.5V AA/UM3
- Battery Current / Life: 0.4 mA / 1200 hours typical
- (alkaline)
- Switch: Flat, roll-off
- Weight: 170 g (6.0 oz)
- Dimensions: 369.0 mm (14.53″) long,
- 21.0 mm (0.83″) diameter
- Output Connector: Integral 3-pin XLRM-type